Mercury 115 Pro XS Problems and Quick Solutions

When you want to feed your need for speed during your boating or fishing experience, I’m sure that Mercury 115 Pro XS pops into your mind every now and then. The truth is, I don’t blame you at all. Pro XS engine is designed in an exceptionally genius way to ensure it meets your demand for fast speed on both fresh and salty water.

But don’t get excited yet! This engine has its shortcomings. Want to know more? Easy! Just stick around with me till the end.

What Are the Problems That Come with Mercury 115 Pro XS?

So you’ve finally installed one of the finest engines in your boat; the Mercury Pro XS. It has used up a lot of your money since it is very expensive to purchase and all of a sudden you notice it has some problems. You know you can’t afford any issues; you’ve spent so much after all. Now, let’s quickly get into the details without further delay.

What Are the Problems That Come with Mercury 115 Pro XS

Constant overheating of the engine

When the thermometer needle is rising, it is usually a sign that the loop is not receiving adequate water as it should. This will immediately cause the engine to overheat and eventually fail since the water that is supposed to do the cooling is not enough.

Lucky for you, this issue has a solution. All you need to do is check if there’s some sort of tearing in the line and replace it. Also, you can evacuate any possible material that could be blocking the water source.

Breakage of the drive belt

As compared to the usual engine noise that we’ve all probably heard of, the itching sound of a drive belt tearing is different and unusual. The moment the ‘overheat’ warning light shows is when you know that something is not right. Your voltage meter may give a hint that the alternator is not charging.

With a broken belt, you won’t have a working alternator. What’s even worse is that the broken drive belt occasionally leads to freezing of the steering cable. A quick fix for this is the evaluation of the surfaces. In addition, you can recheck the broken belt and then change it.

Engine failing to shift into the gear

As you move further from the port, you may end up pushing the gearshift. However, the idling speed of the boat doesn’t increase. And to make matters worse, the shifter fails to facilitate the transference needed.

This can be quite a disruptive and inconvenient situation to be in. Not only that, but this also tends to lead to issues with the shifting of the engine. To correct this issue, you first look out for any stuck cable, and then you release it just so it can be free.

Trim getting stuck

So you’ve reached a slope, but the outboard completely fails to rise. This makes it impossible to direct the boat to the trailer then all the way to the highway. This unplanned situation can be very frustrating, and takes a lot of time to get it fixed.

Just imagine you’re in a hurry, and this happens. It can be very annoying, right? The fixing strategy would be hand-operatively raising it. And to do so, you’ll need to locate the trim release valve.

Boat motor frequently getting stopped

In case you’re an active boat rider, there are high chances that your motor has stopped out of the blue. It can be as a result of different possibilities. Count yourself lucky if it’s simply as a result of the unintentional moving of the switch.

This could also happen you finish up your fuel. If not, then most likely, you’re dealing with an electrical matter, either rust or a faulty connection. Now, this is the king of all the problems.

A quick fix for this is constantly cleaning your cables to prevent rusting. In addition, you can just check for loose connections and tighten them up.

A good propeller makes your motor last longer.

FAQs

1. What is Mercury 115 Pro XS?

Mercury 115 Pro XS is an outboard designed for boaters that are in need of excellent performance and crave fast speed.

2. Is Mercury 115 Pro XS a good motor?

Well, I would say that it has enough capacity to make your boating experience worth it and smooth. However, it has a couple of shortcomings.

3. How fast is a Mercury 115 Pro XS motor?

Truth be told, these engines have a well-earned reputation of top-notch speed up to 4.8 km/hr.

Read also: Best Motor for Inflatable Boat

Wrapping Up

Mercury 115 Pro XS problems are quite inescapable if you decide to opt for this motor. But don’t get me wrong; it’s not all thorns with this outboard. The Mercury Pro XS also has its bright side. I just thought it was nice to share with you in advance the shortcomings that you should expect while using this engine.

Leave a Comment